RSR CSAC模块
RSR CSAC模块

RSR CSAC模块

RSR CSAC模块是JLT制造的超小型、低成本的CSAC模块。商用版设计为直接插入客户的PCB,或使用电缆线束进行连接。该模块由可选的外部1PPS源或可选的外部GNSS接收器驯服。SAASM版本还具有与Rockwell RSR SAASM精灵接收机兼容的外形匹配,并且可以安装在RSR精灵下方,为流行的Rockwell RSR精灵添加CSAC GPSDO保持功能。

描述

RSR CSAC模块是JLT制造的超小型、低成本的CSAC模块。商用版设计为直接插入客户的PCB,或使用电缆线束进行连接。该模块由可选的外部1PPS源或可选的外部GNSS接收机驯服。SAASM版本还具有与Rockwell RSR SAASM精灵接收机兼容的外形匹配,并且可以安装在RSR精灵下方,为流行的Rockwell RSR精灵添加CSAC GPSDO保持功能。该模块的工作电压为2.5V至5.5V,功耗极低,通常小于0.38W。该模块包含一个20皮秒分辨率的双输入时间戳电路,用于从两个独立和可选的USB连接外部1PPS源和RS-232连接的外部GNSS接收机进行驯服。该模块被屏蔽以提供额外的EMI保护。

特点

  • 占位面积非常小
  • 成本低的CSAC
  • 兼容u-blox GNSS和Rockwell SAASM接收机
  • 带有软件CSAC老化校正的保持模块
  • 使用5V、3.0V、3.3V或5V电源或锂离子电池运行

技术参数

Module Specification:  
Long-Term Oscillator Aging (without GPS – no aging with ext. reference) Less than 0.3ppb per month in Holdover without ext. reference
Frequency Stability Over Temperature Better than ±0.5E-09 (CSAC only, no Disciplining, 0°C to +70°C)
1 PPS Accuracy <5ns to ext. 1PPS RMS (1-Sigma) steady-state
Frequency Accuracy Better than ±2E-010 after 3 minutes operation to ext. reference
Holdover Drift (after 5 minute warmup with ext. reference lock) <±2.5us drift per hour over worst case temperature range
Typical Holdover Drift (after 5 minute warmup with ext. reference lock) <±1us drift per hour at 25°C ±5°C
ADEV (with ext. reference lock) 1s: <1E-10, 10s: <2.5E-11, 100s <2E-11, 1Ks: <1E-11, 10Ks: <2E-12
1 PPS Output (CSAC Flywheel Generated) 3.3V CMOS output
10MHz Outputs 10MHz CMOS 3.3V
RS-232 control ports Independent RS-232 ports for SCPI/NMEA and external GNSS Receiver
RS-232 and TTL NMEA Output Sentences NMEA 0183 rev. 2.3, Sentences: GGA, RMC, ZDA, PASHR, and others
External SAASM GPS disciplining option Glue-less control of optional Rockwell Collins RSR Puck SAASM receivers
External GNSS disciplining option Glue-less control and monitoring of uBlox 6,7,8 receivers
TTL Alarm Output Hardware Event Indicator
Warm Up Time / Stabilization Time (CSAC Atomic Lock) <180s at +25°C to <5E-010 Accuracy Typ.
Supply Voltage (Vdd) +2.3V to +5.5V (e.g. 2.5V, 3.0V, 3.3V, 5V)
Power Consumption 0.39W at 5.0V, 0.41W at 3.3V
Operating Temperature -10C to +70C
g-sensitivity <0.2ppb per-g per-axis
Magnetic Sensitivity Less than 0.4ppb per Gauss
Storage Temperature -25°C to +70°C
MTBF > 100,000 Hours at +40C
Connectors Samtec board-to-board, or Hirose board-to-cable
Phase Noise   10Hz -75dBc/Hz  
100Hz -115dBc/Hz
1KHz -128dBc/Hz
10kHz -134dBc/Hz
100kHz -140dBc/Hz
Applications: Glue-less Plug-In Timing and Frequency reference with Atomic Clock
  CSAC Module upgrade for Rockwell Collins RSR SAASM Puck
  Low-Power high-reliability Glue-Less CSAC module
  Atomic Frequency Standard with optional external 1PPS input